We’ve all heard it—that persistent clicking sound coming from our KitchenAid mixer. However, not every noise means something is broken. In some cases, these sounds are normal, especially when mixing thick dough or using attachments. That is to say, some clicking is simply part of regular mixer operation.
Still, not all sounds should be ignored. For instance, if your KitchenAid mixer suddenly starts clicking louder than usual or the rhythm changes, it could signal internal wear. Consequently, ignoring it may lead to gearbox damage. If the clicking becomes more frequent or is accompanied by burning smells or shaking, it’s time to dig deeper. You can always explore KitchenAid mixer repair in Calgary if you’re unsure.
Common Causes Behind the Clicking Sound
We often find that clicking issues stem from internal gear problems. That is to say, stripped or misaligned gears are a typical source of rhythmic clicking during use. Most importantly, worn bearings can also cause the beater shaft to wobble and create unusual sounds.
Likewise, a loose planetary assembly or housing screws may contribute to this noise. In addition, food debris stuck near moving parts can mimic more serious problems. So, it’s essential to rule out external causes before assuming the worst. If you’re unsure how to diagnose this, booking a professional mixer repair service can prevent unnecessary part replacements.
When to Stop Using Your Mixer Immediately
We recommend stopping use right away if your mixer’s clicking sound grows louder under light loads. In other words, if your mixer clicks even while idle or empty, it’s not a good sign. Above all, protect your motor and gears by turning the unit off as soon as you notice changes.
Secondly, if the clicking is followed by jerky motions or speed inconsistencies, there may be deeper electrical issues at play. On the other hand, waiting too long could turn a small repair into a full rebuild. Therefore, early intervention saves you money and time. If you’re stuck on what steps to take, don’t hesitate to Contact Us for diagnostic guidance.
What a Repair Technician Will Inspect
We always start by inspecting the gear housing and lubrication levels. In other words, dried or leaking grease can cause metal parts to grind, leading to clicks. Moreover, technicians check the worm gear assembly and motor coupler alignment to spot internal damage.
Similarly, we assess whether the beater shaft is bent or off-center. During this stage, removing the planetary hub cover helps us get a clearer picture of the mechanical condition. After that, any worn gears or loose fasteners can be replaced to prevent further breakdowns. To streamline service, we recommend reading about our same-day mixer repair solutions if you need help fast.
Preventing Gearbox Damage in the Future
We encourage our customers to run their mixers at the correct speed for each task. That is to say, don’t use Speed 10 for kneading dense dough. Consequently, misusing speed settings can strain the gearbox and cause premature wear.
In the same vein, avoid overloading the mixer bowl beyond its listed capacity. Most importantly, regular cleaning and lubricating ensure smooth gear rotation and longer machine life. Furthermore, always inspect attachments and ensure they’re fitted properly before use. Maintaining these small habits prevents sudden clicking issues from developing.
When Replacement May Be the Better Option
We aim to repair whenever feasible, but some cases call for a replacement. However, when the cost of fixing multiple internal components rivals the price of a new mixer, we give honest guidance. For example, if your model is over ten years old and has been repaired more than once, new parts might not be worth it.
Likewise, if parts are no longer available or the frame is cracked, a full replacement makes sense. In conclusion, we help you weigh the pros and cons based on your usage and budget. You can always call us to discuss whether your situation warrants fixing or replacing your unit. You can read more by visiting Alberta Business Beat.
Frequently Asked Questions
What does a clicking sound mean in my KitchenAid mixer?
A clicking sound often means there’s wear in the gears or issues with the beater shaft. However, it could also come from loose screws or attachments.
Is it safe to keep using my mixer if it clicks?
If the sound is mild and only under heavy load, it may be safe. That is to say, persistent or worsening sounds mean it’s best to stop and inspect.
Can I fix a clicking KitchenAid mixer myself?
Some minor issues like loose beaters can be fixed at home. However, internal gearbox problems require expert tools and knowledge.
How much does it cost to fix a clicking sound?
Costs vary based on the part causing the issue. Generally, repairs range from affordable quick fixes to more expensive gear replacements.
How do I book a repair service?
You can reach out through our Contact Us page to book a service appointment. We also offer diagnostic help over the phone.
